How to disassemble the machine?
Before disassembling the machine must be prepared. You need to stand in front of the table where you will disassemble the machine. Of course, you can manage with a stool. Now you need to cover the surface of the table with any cloth in order not to damage and scratch the table.
If you wake up to sports interest -disassemble the machine for a while. The standard in the army: for 15 seconds to disassemble, for 25 seconds to assemble the machine. It takes 40 seconds to assemble and disassemble. But if you practice, after a week of training, you can do all these actions, even in 30 seconds. Let's take a closer look at the stages of disassembly and assembly of the machine.
How to disassemble the Kalashnikov assault rifle
- Separate the store (horn) with cartridges from the machine, grabbing the right hand shop, and thumbing the store lever.
- Remove the machine from the fuse, send the muzzlegun to the ceiling (sky) and make a control shot (click on the trigger). This action is necessary and necessary because one cartridge can still be in the machine, even when the horn is separated or empty.
- Pull out the pencil case, which is in the automatic butt. It is removed by a simple touch of a finger. This pencil case contains all the tools (small screwdrivers) needed to repair the machine.
- Remove the ramrod from under the barrel. It must be knocked out, not pulled out. Do this with an edge or a heel of the palm. Do not hit hard enough not to hurt your hand.
- Separate the receiver cover from the machine.
- Separate the return mechanism. This is a long spring, which you just need to pull out.
- Separate the bolt with the bolt frame from the receiver. These two mechanisms are interconnected, so they need to be disconnected.
- Separate the bolt from the bolt frame.
- Separate the gas tube with the trunk overlay from the trunk of the machine.
Parts and mechanisms of the machine when disassembling are arranged in the order of disassembly, so that when assembling the machine it was easier. Now you know how to disassemble the machine!
How to assemble a Kalashnikov assault rifle
- Insert the gas tube with the barrel into the trunk of the machine.
- Insert the bolt in the slide frame.
- Insert the bolt with the bolt frame into the receiver.
- Insert the return mechanism into the machine and snap it, making sure that it is in its place.
- Replace the cover of the receiver and press it down.
- Push the ramrod of the submachine gun under the barrel. It is necessary to drive it in a little.
- Put the pencil case with the tools in place.
- Direct the muzzle of the submachine gun to the ceiling (sky) and make a control shot (click on the trigger).
- Now put the gun on the fuse.
- Connect the magazine (horn) with cartridges.
Now you know how to disassemble and assemble the machine! This knowledge will be useful to you in practical exercises on assembling weapons, for example, in the army.